Getting Stood Up

The Kendon Stand-Up lift now comes standard with air-over-hydraulic operation for use in the shop with a compressor or on the driveway with a hand pump. Either way, the Kendon Stand-Up lift is a tool you won’t want to be without. Three models are available: Sport, Cruiser, and Chopper. Also available are a variety of accessories, including a frame jack for unfettered access to front and rear wheels.

For more information, contact Kendon Industries at (714) 630-7144, or visit www.kendonusa.com.

Talk Of The Town

Wanted Choppers is pleased to introduce its new line of NFA pipes with custom fitments for all left- and right-side-drive applications. All exhaust pipes are built from .065 mandrel-bent steel, and all mounting hardware is included. The pipes are available in triple-chrome-plated, black-ceramic-coated, or heat-wrapped finishes. There are five different styles to choose from, and all pipes require H-D stock exhaust flanges.

For more information, contact Wanted Choppers at (305) 406-3004, or visit www.wantedchoppers.com.

Catching Zs

Leave your mark of excellence with the legendary “Z-Bar” by LA Choppers. These bars are 1-inch-diameter high-grade steel tubing, and are for use with 1-inch stock-style handlebar clamps, grips, and controls. As always, LA Choppers bars are drilled and dimpled for internal wiring and can be used with hydraulic clutch setups.

For more information, visit the LA Choppers website at www.lachoppers.com.

Razor Sharp

Tempest Cycles’ Razorback hand grips have been designed for use on bikes that use a single or dual cable-style throttle system. They are offered for internal throttle systems as well. These grips have been engineered to fit 1-inch-diameter handlebars and are a great accent for any bike. They’re CNC-machined from billet aluminum and have a triple-plated chrome finish. The powdercoated tips are available in your choice of 11 different candy colors, including polished aluminum. They are also available in raw aluminum for those who wish to add their own custom colors to their grips.

For more information, contact Tempest Cycles at (321) 724-0601, or visit www.tempestcycles.com.

Size Matters

The 3-inch beltdrive kit offered by Custom Chrome through its dealer network contains a newly designed motor plate cut from fully polished 6061-T6 billet aluminum, double-row sealed mainshaft bearing, polished-aluminum pulley covers and side plate, competitor clutch with Kevlar frictions and updated ball-bearing lock-up pressure-plate design, starter jackshaft, and housing. Completing the kit is a standard pulley offset. The beltdrive is applicable for wide-tire applications by simply purchasing an additional pulley offset. It fits Softails models from 1990 through 2006.

For more information, contact your local Custom Chrome dealer, or visit www.customchrome.com.

Meow

Pro-One’s LED Cat Eye license-plate system is more than meets the eye. While the frame is contoured and fabricated from chrome billet aluminum, the Cat Eye light is a three-color, permanently sealed light system. Each unit provides brilliant tail, brake, license-plate, and turn-signal illumination in red, amber, and yellow. The sanitary frame accepts most 4×7 license plates. Additionally, Pro-One offers both a weld-on swingarm mount and flush-mount weld-in bucket for the high-tech frame.

For more information, contact Pro-One at (800) 884-4173, or visit www.pro-one.com.

Good Handling

The new Handler 187 MIG-welder from Hobart Welding Products is an industrial-grade welder that offers a seven-tap voltage selection control. Combined with the seven taps, better inductance enables the Handler 187 to provide better arc starts, have smoother arc performance, create less spatter for less clean-up, and create weld beads with a professional appearance. Anyone welding stainless steel will notice beads with a flatter crown and good wet-out at the toes of the weld.

For more information, contact Hobart Welding at (877) 462-2781, or visit www.hobartwelders.com.

Once You Go Fat

Fat Baggers is bringing to the public the ’07 200mm Fat Tire Kit. This kit fits all ’07 FLH Harley-Davidsons and will truly give you a custom look. It comes with everything you need to set up your bagger. Two kits are available: one that includes rear wheel, and one that does not.

For more information, contact Fat Baggers at (641) 774-7499, or visit www.fatbaggers.com.