HB Forward And Hand Controls - Buyer's Guide

Battistinis Billet Forward Controls $995
CNC-machined billet aluminum constructionSleek design uses lever pivot for footpeg mountAvailable in stock and +3-inch lengths (3-inch extended kits will require a custom brake line)Includes footpegs and brake/shifter pegsFor more information, visit Battistinis at or contact your local Drag Specialties dealer

Big Bear Choppers Forward Controls $999Comes with drilled hot rod radius arms and bolt capsBrake reservoir comes tucked behind the pegMakes for more ground clearance in the turnsFits '84-'99 Softails and most custom modelsFor more information, contact Big Bear Choppers at (909) 878-4341, or visit

Biltwell Forward Controls $462
Machined from 6061 billet aluminum and heat-treated for added strengthFits all H-D Evo era frames or aftermarket equivalentRubber on toe shifter and footpegs can be replaced with standard 7/8-inch BMX or Motocross grips when they've worn outFor more information, contact Biltwell at (951) 699-1500, or visit

Custom Cycle Control Systems Climax Hand Controls $1,899
Hand Control kit includes dual cable internal throttle, both fluid reservoirs, seven switches total, grips, install kit, and much moreHand controls can be sold with handlebar kit or sold aloneShips completely assembledFor more information, contact Custom Cycle Control Systems at (866) 439-2129, or visit

Cyril Huze Ellipse Hand Controls Starting At $1,125
Hand controls feature a master cylinder for use with either single (1/2-inch bore), or dual (9/16-inch bore) front discsCable or hydraulic clutch master cylinder, optional two or three button switch housing to choose for each sideThrottle housing with single or dual cable and optional micro brake light switch are also availableFor more information, contact Cyril Huze at (561) 392-5557,or visit

Drag Specialties Handlebar Control Kits $299.95
Chrome handlebar kits for late model SportstersAvailable for single or dual-disc braking systemsMade from aluminum and finished in chromeUse OEM switches or equivalent (not included)For more information, contact Drag Specialties at

Dragonfly Cycle Concepts Detachable Fairing Hand Control Adapter Kit $350-$400
Hand Control adapter kit to fit Dragonfly's detachable fairings used on Road King, Heritage Softail, Fat Boy, and Deluxe modelsUses stock Electra Glide switch housing in conjunction with Dragonfly's interface module to tie into the original four-pin quick-wiring harness supplied with Dragonfly's Kenwood marine unitsDoes not interfere with cruise controlFor more information, contact Dragonfly Cycle Concepts at (877) DGRNFLY, or visit

Mammoth Choppers Hand Controls without switches $450, with switches $649.95
Custom-machined from 6061 billet aluminumFeature 11/16-inch master cylinder bore which makes it feasible to use with dual disc setupsTriple chrome-platedIncludes left and right side controls for 1-inch diameter handlebarsFor more information, contact Mammoth Choppers at (800) 235-0272, or visit

Tempest Cycles Razorback Forward Controls $995
Razorbacks are designed for '84-'99, and '00-present SoftailsTempest uses two stainless steel precision-sealed ABEC 3 bearings on each side of the pivot boltPowdercoated tips are available in your choice of 11 different candy colors, including polished aluminum Also available in raw aluminum for those that wish to add their own custom colorsFor more information, contact Tempest Cycles at (321) 724-0601, or visit

Jaybrake J-Series Hand ControlsContact for Price
J-Series Controls feature a lower profile than their Classic ControlsMachined from billet aluminum and are available in polish, chrome, or black anodized finishesRelocated pivot point for smooth lever pullFeatures a 5/8-inch bore on the master cylinder for ample braking pressure and a 9/16-inch bore for easy clutch actionFor more information, contact Jaybrake at (716) 592-0554, or visit

Kuryakyn Widow Grips $89.99-$99.99
Spider-themed grips have an integrated adjustable throttle bossFits '82-'08 H-D models with dual cable throttle controlsAlso available for '08 H-D models with Electronic Throttle Control ('08 Dressers, Road Kings, Road Glides, Street Glides)For more information, contact Kuryakyn at (866) 277-9598, or visit

Performance Machine Contrast Cut Hand Controls $369.95
Each control is polished and then black anodized for a custom, two-tone lookPM logo showcases raw aluminum finishAvailable in both clutch and brake versionFor more information, contact Performance Machine at (714) 523-3007, or visit

Arlen Ness Rad III Handlebar Controls $349.95
Complete kits include: master cylinder, brake lever, clutch perch, brake lever, and appropriate chrome switchControls and switch housings accept all factory wires, cables, lines, and switchesAvailable for '96-'07 single or dual disc applications (except hydraulic clutch models)For more information, contact Arlen Ness at (925) 479-6350, or visit

Pro One Forward Controls Starting at $679.95
Each set features folding pegs, roller bearings and thrust bearingsMounting plates and shift levers are manufactured from 6061 billet aluminum and are finished in show chrome or black anodizeFor more information, contact Pro One at (800) 884-4173, or visit

Milwaukee Twins Chromed and Polished Forward Controls $554.99
Fit '82-'08 Big Twins
Made from 6061 billet aluminum and come complete with folding rubber banded pegsKits do not include mounting hardware, brake hose, or shift rod

For more information, contact J&P; Cycles at (800) 397-4844, or visit

Stampede Forward Controls $568
Available in four different styles: Roller, NiteStick, Aftermath, and Lancer (featured here)
Billet controls are available in FXST, Dyna, FXR, and Victory modelsAvailable in the following finishes: polish, chrome, black anodize

For more information, contact MC Advantages at (800) 726-9620, or visit

Hawg Halters, Inc. Hand Controls Starting at $418
Available for single or dual disc and mechanical or hydraulic clutch
Featured in chrome, polish, and black anodized finishes
Can be purchased with or without custom switch housings

For more information, contact Hawg Halters, Inc. at (877) 442-5837, or visit

West Coast Choppers FTW Bear Trap Floorboard and Control Package $599
Complete package includes matching brake arm with pivoting toe pad and heel-toe shifter
All pieces are flame cut from 1018 steel and finished in rugged military matte black
Also feature a polished stainless steel insert with intricate FTW cutout Fits '80 and up FL models

For more information, contact West Coast Choppers at (562) 983-6666, or visit

Harley-Davidson Diamond Black Collection Hand Grips $69.95
Blacked-out handgrip features knurled surfaces to expose the raw billet aluminum
Finished in satin blackOutside diameter of grip is 1-1/2 inches in diameter and features a glue-less installation that can be easily removed for service

For more information, contact Harley-Davidson at (800) 443-2153, or visit