Redneck's Prized Monster

A 100ci Mutant

Redneck's Prized Monster - Hot Bike Magazine

For years Nobody and the crew over at Redneck Engineering have been transplanting Buell and Sporster drivetrains into their own line of frames. Well, to celebrate S&S;' 50th Anniversary, the Redneck team created this amazing MonoShock Mutant with one of S&S;' 100ci SB engines at the heart.

With its wild no downtube frame (the engine acts as a stressed member), sleekly-super-stretched gas tank, and over all unique and intriguing look, it's no surprise that Nobody and the Redneck boys rolled away with the third place honors in their class, SB-Series. The SB Series engine is a Sportster style power plant but packs a punch with its 100ci displacement.

While the 6-inch backbone stretched Mutant frame is a MonoShock design, Redneck cushioned the suspension up front with one of its own New Skool springer frontends. Nearly every major component on this bike was built by Redneck except for the Fuelie wheels, which were done by HHI, but even then Redneck had to add their own touch to them.

One of the most interesting things about this bike was that it was built back in early 2008 for the S&S; 50th Anniversary party which took place in late June of that same year. Ok so that was three years ago right? Well, peep the rear wheel/tire. It's a 23 setup. These days 23s are pretty common-place up front on everything from baggers to Sportys. Looks like Nobody are his crew was looking forward to the feature, from the rear.

BIKE OWNER Nobody
SHOP NAME Redneck Engineering
SHOP PHONE 864-843-3001
SHOP WEBSITE www.RedneckEngineering.com
YEAR/MAKE/MODEL 2008 Redneck MonoShock Mutant
FABRICATION Redneck
ASSEMBLY Redneck
BUILD TIME 10 Days
ENGINE
YEAR/MANUFACTURER S&S;
TYPE/SIZE 100 ci Sportser
BUILDER S&S;
CASES
CYLINDERS
HEADS
ROCKER BOXES
CARBURETOR S&S;
AIR CLEANER Redneck Engineering
EXHAUST Redneck Engineering
TRANSMISSION
YEAR/MANUFACTURER/TYPE 2008 Baker
CASE S&S;
CLUTCH
PRIMARY DRIVE Nasty Boys / Redneck
FRAME
YEAR/MANUFACTURER 2008 Redneck Engineering
RAKE 44 deg
STRETCH 6 out –1 down
SUSPENSION
MANUFACTURER FRONT Redneck Engineering
LENGTHS
TRIPLE TREES Redneck Engineering
MANUFACTURER REAR Redneck/ Progressive Suspension
SWINGARM Redneck Engineering
WHEELS, TIRES, AND BRAKES
MANUFACTURER FRONT/TYPE HHI/ Redneck Fuelie
SIZE-HEIGHT/WIDTH 21x3.25
TIRE/SIZE Avon 120 21
CALIPER HHI
ROTOR Renagade
MANUFACTURER REAR/TYPE HHI/Redneck Fuelie
SIZE-HEIGHT/WIDTH 23 x 4
TIRE/SIZE Avon 23
CALIPER HHI 4piston Sprotor
ROTOR HHI / Redneck Engineering
FINISH/PAINT
COLOR Two Tone Volvo Silver Blue
PAINTER Keith/ Carolina Custom Paint
GRAPHICS Keith/ Charlie Tyre
ACCESSORIES
FRONT FENDER None
REAR FENDER Redneck Engineering
FENDER STRUTS
GAS TANK∩ Redneck Engineering
OIL TANK In Frame/ Redneck Engineering
HANDLEBARS Redneck Engineering
RISERS
HAND CONTROLS PM Modified
FOOT CONTROLS PM
FOOTPEGS PM
HEADLIGHT Drag 4.25
TAILLIGHT Redneck Engineering/ Radiance led
LICENSE MOUNT Redneck Engineering
SEAT Pan Redneck/ Covering Outlaw Custom