ProCharger Supercharger Install, Part 2 | 2011 Harley-Davidson Dyna Photo Gallery
Procharger Supercharger Install Part 2 Belt Tensioner
4 The big, beautiful billet outer primary cover and gasket were torqued onto the inner cover (don’t forget the bolt hidden under the belt tensioner pulley) in the proper sequence. The idler pulley was then installed with the belt and the belt tensioning jig was secured to the outer cover. The included belt tension tester and a machinist ruler were used to establish 3/32-inch of belt deflection between 6 and 6-1/2 pounds of force.