26. After the base map was installed and the bike was properly dialed in, the installation was complete. The bike was then taken over to the dyno for some final results. In its stock form the bike put out 65hp and 82lb-ft. of torque. After installing the Trask Turbo the bike put out 119.70hp and 126.47lb-ft of torque, an increase of 54hp and 44lb-ft of torque. We were pretty happy with the results, the bike makes smooth, strong power with the torque reaching its peak at about 3.600rpm. What’s nice is that the torque maintains over 100lb-ft from 2,600 to 6,000 rpm, while the horsepower steadily climbs.