|
8. The next thing was to drain any and all the old gas from the tank. As we pulled the fuel line from the petcock we found it was clogged, we used some compressed air and blew out the line. After all the old gas (if you can call it that) was gone, the tanks were pulled from the bike and it was given a good washing. Everyone has a way of doing this, but one thing that you can do is let the tanks dry completely by letting them sit in the sun for a day or two. Then add a little gas to the tank, splash it around a bit, and drain that out and let it sit. This will help pull any leftover water from the tank. View Related Article
|
|