14. We were not let down with the numbers. Having ridden bikes all his life, Uncle Vic said that "this bike is well over 110-hp, I can feel it." He was not that far off. The bike pulled 108.4-hp and 108.9 ft-lb of torque. We pulled up the ProTune II 3D graph and what we found was the map and the dyno chart were almost a match to the base file. So the bike is doing exactly what it was programmed to do, run at the most efficient way with the most horsepower it can. Before we started this hop-up the bike was pushing 72 hp and 82 lb-ft of torque. So we gained over 36 hp and almost 27 lb-ft of torque. So now Vic is really happy, he brought his old tired bike back to life with tons of horsepower and torque, and now his bike is running with up to date technology with the closed loop system. The addition of the VFI module will allow him to make further modifications and still keep the bike running at optimal performance. As the bike left the shop there was a chirp of the rear tire and a lift of the frontend as he hit the street, and all Vic said was "I'm going to need a new rear tire."