11. Eric connected the PC pin plug from the S&S VFI module to the laptop on the dyno and selected in a base program based on the bike's set-up like the pistons, the cam and the exhaust. This is the starting point for the VFI modules closed loop system to fine tune its program and settings as the bike is ridden. Then the bike was turned back over to the owner (Uncle Vic), who needed to get as many miles on the bike as he could before we put it on the dyno. Over the next three weeks he racked up just over 1,500 miles with trips up to the high desert out to the beaches and up about 4,000 feet of altitude in the SoCal mountains. Vic told us the bike ran great and could not see how it could get better.