RideMaxx Plus
Contact for Price
The RideMaxx Plus is a plug-and-play fuel injection management device available for '01-09 Softails and '02-09 Touring models. Plug it directly into your bike's ECU and the system's two settings will take your fuel capabilities to the next level. Simply push the PWR setting for more of a performance edge, or the ECON setting when traveling to conserve fuel. Now you get the best of both worlds with the push of a button.
Contact
Ridemaxx
(866) 930-2930
http://www.americanmicrofuel.com
Baker Drivetrain DD7
Contact for Price
The DD7 is here! Baker Drivetrain's direct-drive seven-speed trans is now available for Harley-Davidson motorcycles utilizing six-speed Cruise Drive transmissions. The DD7 features a lightweight mainshaft and smaller First gear to reduce shift clunk while also incorporating a full set of helical gears for an even smoother transition between the gears; all seven of them.
Contact
Baker Drivetrain
(877) 339-3835
http://www.bakerdrivetrain.com
Roland Sands Design Fork Brace Starting at $129.95If you're looking to ditch that front fender but don't want all of the attention focused on the front tire's tread, the crew at RSD has released a new Fork Brace in either black or chrome finish for '84-08 Softail models except FXSTD, FXCW, and FXCWC. It's designed to be used for 21-inch wheels and comes stamped with a copper RSD logo riveted into the top, plus it comes with chrome hardware.
Contact
Roland Sands Design
(877) 773-6648
http://www.rolandsands.com
Illusion Cycles Certified Motors Starting at
$3,999.95
In order to comply with demands set by the Environmental Protection Agency (EPA) and California Air Resources Board (CARB), motor manufacturers have had to switch things up a bit in order to meet emissions standards. Illusion Cycles met those demands and developed these 49-state EPA-certified/50-state CARB certified motors available from 80ci to 114ci. With a 4 1/4-inch stroke and a variable bore of 3 1/2 to 4 1/4 inches dependent upon the purchaser, the Illusion powerplant comes with an application-specific 42mm Mikuni carburetor and fully compliant air box.
Contact
Illusion Motorcycles
(714) 894-1942
http://www.illusionmotorcycles.com
Harley-Davidson Black
Thunderstar Wheel $424.95Harley's contrast-cut, cast aluminum Black Thunderstar wheels feature a satin finish with five machined spokes and matte-black textured webs. Available for '09 Touring models, the Black Thunderstar spinners will also fit other Harley models with the use of a model-specific Wheel Installation Kit. To complement the look of the new wheel, a set of matching rotors and sprockets are also available.
Contact
Harley-Davidson
(800) 443-2153
http://www.harley-davidson.com