Add Roar To To A Road King
|
5. It would be nice if you could remove each stock pipe as one piece, but you can't. We had to loosen nearly every joint and all the heat shields. We started with the slip-on mufflers and removed the rear bracket screws and loosened the pipe clamp to the header pipe. Adding a shot of Liquid Wrench or WD40 into the joints helped with separation. Next we removed the nuts from the front and rear cylinder head exhaust studs, and then removed all the bolts holding the pipes to the stock mounting brackets. We disconnected the crossover tube between the front and rear headers. View Related Article
|
|