Sportster Bagger?

5. You'll need to purchase the H-D Detachable Windshield and Docking Hardware kit separately. It includes the necessary clamps and hardware for the install.

6. We installed the H-D kit to the fork legs, two on each side between the upper and lower triple trees. (Quick tip: before installing the quick-detach bracket onto the fairing itself, we wanted to make sure we positioned the H-D detachable windshield hardware in the right place. We used the bracket to do so and we also checked for clearances.)

7. Once the H-D hardware was installed and the windshield and quick-detach brackets were mounted to the fairing, we simply clicked the fairing into place.

8. The Hoppe Vanilla Zilla fairing looked quite appealing on the Sportster.

9. Fat Max's Detachable Fiberglass Bags are lightweight and are easy to install. The bags come with a nylon zippered bag inside to easily store belongings. The mounting bracket is also included (not shown) and installs in minutes.

10. We removed the wiring from the turn signals that feeds into the rear brake light mount from both sides. Then we removed the sideplates from the fender struts.

11. Next, we installed the mounting brackets on both sides.

12. Once we mounted the bag in place, we secured it to the bracket with a wing nut and were ready to roll.

13. Our vision materialized and we couldn't have been happier with the outcome. We turned a Sportster into a convertible bagger.