Hot Bike Magazine Homepage Hot Bike

Big Radius Voltage

<strong>3.</strong> The voltage regulator was removed to gain access to the front O2 sensor, followed by unplugging the front and rear O2 sensor. In order to remove the front and rear heat shields, Bryan loosened the worm clamps on the shields. Then he removed the bolts attaching the exhaust mount bracket to the frame.
Exhaust Makeover - Sound Off & Look Good Doing It

 3. The voltage regulator was removed to gain access to the front O2 sensor, followed by unplugging the front and rear O2 sensor. In order to remove the front and rear heat shields, Bryan loosened the worm clamps on the shields. Then he removed the bolts attaching the exhaust mount bracket to the frame.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide