Hot Bike Magazine Homepage Hot Bike

Txr Stabilizer Tri Link Installed

Next the TRI-Link was installed. The lower bolts use the thin aluminum standoffs on the motor mounts. Then he bolted the top of the intermediate member to the top motor mount, adjusting the heim joint to line up with the mount. Once all three heim joints were in place, James tightened them all down evenly.
TXR Frame Stabilizer & TRI-Link - Hot Bike Tech

 Next the TRI-Link was installed. The lower bolts use the thin aluminum standoffs on the motor mounts. Then he bolted the top of the intermediate member to the top motor mount, adjusting the heim joint to line up with the mount. Once all three heim joints were in place, James tightened them all down evenly.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide