Hot Bike Magazine Homepage

Txr Stabilizer Cross Member Plate Placement

Then the TXR cross-member plate was bolted in place with the intermediate member loose. Then the rear single heim joint with the small stand-off was bolted to the rear of the trans plate (arrow #1). The intermediate member and fasten the bolts to the trans plate (arrow #2).
TXR Frame Stabilizer & TRI-Link - Hot Bike Tech

 Then the TXR cross-member plate was bolted in place with the intermediate member loose. Then the rear single heim joint with the small stand-off was bolted to the rear of the trans plate (arrow #1). The intermediate member and fasten the bolts to the trans plate (arrow #2).  View Related Article

 

 

Car Research Guide