LEDs, New Pipes And More: Hot New Products

Size Matters

The 3-inch beltdrive kit offered by Custom Chrome through its dealer network contains a newly designed motor plate cut from fully polished 6061-T6 billet aluminum, double-row sealed mainshaft bearing, polished-aluminum pulley covers and side plate, competitor clutch with Kevlar frictions and updated ball-bearing lock-up pressure-plate design, starter jackshaft, and housing. Completing the kit is a standard pulley offset. The beltdrive is applicable for wide-tire applications by simply purchasing an additional pulley offset. It fits Softails models from 1990 through 2006.

For more information, contact your local Custom Chrome dealer, or visit www.customchrome.com.

Meow

Pro-One's LED Cat Eye license-plate system is more than meets the eye. While the frame is contoured and fabricated from chrome billet aluminum, the Cat Eye light is a three-color, permanently sealed light system. Each unit provides brilliant tail, brake, license-plate, and turn-signal illumination in red, amber, and yellow. The sanitary frame accepts most 4x7 license plates. Additionally, Pro-One offers both a weld-on swingarm mount and flush-mount weld-in bucket for the high-tech frame.

For more information, contact Pro-One at (800) 884-4173, or visit www.pro-one.com.

Good Handling

The new Handler 187 MIG-welder from Hobart Welding Products is an industrial-grade welder that offers a seven-tap voltage selection control. Combined with the seven taps, better inductance enables the Handler 187 to provide better arc starts, have smoother arc performance, create less spatter for less clean-up, and create weld beads with a professional appearance. Anyone welding stainless steel will notice beads with a flatter crown and good wet-out at the toes of the weld.

For more information, contact Hobart Welding at (877) 462-2781, or visit www.hobartwelders.com.

Once You Go Fat

Fat Baggers is bringing to the public the '07 200mm Fat Tire Kit. This kit fits all '07 FLH Harley-Davidsons and will truly give you a custom look. It comes with everything you need to set up your bagger. Two kits are available: one that includes rear wheel, and one that does not.

For more information, contact Fat Baggers at (641) 774-7499, or visit www.fatbaggers.com.