Hot Bike Magazine Homepage Hot Bike
Facebook Click here to find out more!

Brake Pedal Being Pumped

Brake Pedal Being Pumped
New Z-Plus Motorcycle Brake Pads from Lyndall Racing Brakes
The fresh DOT-5 was pumped though the line until all the old fluid and air bubbles were out of the line. At the same time as the pedal was pushing fluid though the line, it was important to notice how fast the pressure was building back up. If you can still push the pedal all the way down with the bleeder tightened, then you may have a leak, so check and tighten all fittings on your brake system. View Related Article
Motorcycle Wheel Being Removed Motorcycle Wheel Missing Buttons Lyndall Buttons Lined Up Lyndall Buttons Being Installed Calipers Being Cleaned Worn Brake Pads Sliding Out Lyndall Brake Pads In Package
Old Brake Fluid Being Checked Brake Bleeder Needs Replacing Brake Lines Being Bleed Rear Calipers Being Removed Old Brake Pads Worn Out Old Brake Fluid Being Replaced Brake Pedal Being Pumped
Finished Motorcycle Test Drive
Get Adobe Flash player
Hot Bike