With a few twists of a Torx bit, the handle was secured to the mounting bracket. We removed the mounting strap from the stock seat and secured it to the back of the Sundowner seat.We removed the mounting strap from the stock seat and secured it to the back of the Sundow Finally, the seat was secured with the seat screw. To avoid damaging the fender, care must be taken at this point to ensure the seat is set properly on the fender.Finally, the seat was secured with the seat screw. To avoid damaging the fender, care must Attaching the backrest is as simple as sliding it through the opening in the seat and into the base mount.Attaching the backrest is as simple as sliding it through the opening in the seat and into Harley's Tour Pack (part No. 53116-97DH; MSRP: $675), complete with detachable hardware, is a snap to install, while adding some serious storage space.Harley's Tour Pack (part No. 53116-97DH; MSRP: $675), complete with detachable hardware, i Installation of the Sidekick seat was as simple as removing the Sundowner and backrest assembly, then sliding it into position prior to securing it with a single screw.Installation of the Sidekick seat was as simple as removing the Sundowner and backrest ass SOURCES Harley-Davidson « | 1 | 2 | View Full Article Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
