08. ...the cam support plate and cams were reinstalled back into the cam chest and the cam cover replaced with a fresh gasket.08. ...the cam support plate and cams were reinstalled back into the cam chest and the ca 09. The HTCC pistons have a unique dome shape with a recessed area in the center resembling a peanut. Because of the shape, these pistons only work with the HTCC cylinder heads to obtain multiple squish bands, turbulence, and static compression ratio. This leads to a more complete burn during combustion, increasing efficiency and power.09. The HTCC pistons have a unique dome shape with a recessed area in the center resembli 10. Here's another look at the unique piston shape as Larry installed the piston-pin lock ring.10. Here's another look at the unique piston shape as Larry installed the piston-pin lock 12. After both cylinders were in place, the heads were fitted with compression releases that will aid in starting the big, high-compression motor.12. After both cylinders were in place, the heads were fitted with compression releases t 13. The ported HTCC heads are predrilled for the compression releases. The manual releases were inserted next to the spark-plug hole and tightened...13. The ported HTCC heads are predrilled for the compression releases. The manual release « | 1 | 2 | 3 | » | View Full Article By Jim Houck, Toph Bocchiaro Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
