Hot Bike Magazine Homepage Hot Bike

0310hb Fuel10 Z

The slip-on was fastened back into place and the actual O2 sensor was tightened to the bung. To prevent tangled wires later, remember to wind the cable for the sensor counterclockwise approximately four or five turns before inserting it.
Fuel Management From Terry Components ...

 The slip-on was fastened back into place and the actual O2 sensor was tightened to the bung. To prevent tangled wires later, remember to wind the cable for the sensor counterclockwise approximately four or five turns before inserting it.  View Related Article

 

 

Get Adobe Flash player

Car Research Guide