Performance Machine Phatour 180 Kit
$999.95-$1,199.95
Looking to fatten up your bagger's rear end without swapping out the stock swingarm? This new Phatour 180 kit converts the bike to using a chain drive using the supplied motor sprocket, accompanied by any of PM's 5.5x18-inch rear wheels with matching rear sprocket (not included). For just a little extra dough you can have the fender with the license plate integrated into the sheetmetal.Contact Performance Machine(714) 523-3000www.performancemachine.com
Fueling Oil Pump Corporation Pressure Relief Spring/Valve Removal Tool
$199
The screwdriver can obviously be used for many more tasks than tightening/loosening screws. But when it comes to removing/installing the pressure relief spring, bypass valve, and roll pin in the Twin Cam's cam plate, you run the risk of damaging these components when using the trusty flathead. With Feuling Oil Pump's specialty removal tool, you take the risk out of the equation. Just pop it in, turn, and voila, removing the relief spring has never been easier. When you're ready to re-install...you get the idea.Contact Feuling Oil Pump Corporation (619) 917-6222www.feulingparts.com
LA Choppers FXD Lowering Kit
$104.95
Take it down a notch. And by "it," we're referring to your '95-'05 or '06-'07 Dyna, with LA Choppers' 6061-T6 billet aluminum lowering kit. Finished in a black anodize sheen, the lowering kit comes complete with necessary mounting hardware and installation instructions.Contact Drag Specialties www.dragspecialties.com
S&S P-Series Engines Starting at $7,280
Remember the phrase "History repeats itself"? Well, the new, yet strangely familiar P-Series engines are not reproductions of the old; they are more technologically advanced-with old-school flair-and more than capable of logging plenty of miles with power comparable to engines of today. The P-Series 93-inch, 93-inch high-compression, and 103-inch high-compression powerplants are available for a variety of frame styles: '54-'64, '48-'53 with a tin primary, '65-'69, and the alternator/generator model for '70-'99.Contact S&S www.sscycle.com
Dakota Digital Flush Mount Gear Indicator
$225
Take the guesswork out of shifting with the Gear Indicator from Dakota Digital, which easily identifies gears 1-7 on your stock or custom bike. The upside of having a gear indicator: It's easy to mount and fits any bike with an electronic speedometer and 12-volt battery. The downside: There isn't a downside. Don't be so pessimistic!Contact Dakota Digital(800) 593-4160www.dakotadigital.com
Battistinis Brake Arm
$259.95
Since we don't condone swearing at HOT BIKE, we're not going to use the obvious clich-holy (blank)-when describing Battistinis' new foot brake levers. Instead, we'll just give you the pertinent facts: Machined from 6061-T6 billet aluminum, these lightweight levers are available in a black anodized/machined finish (pictured), or good old chrome to fit your FL/Touring model bikes.Contact Battitinis Custom Cycles (925) 270-4211www.battistinisusa.com
Pro-One Ventilated Billet Oil Cooler
$319.95
Help alleviate the stress of frying your motor with this Ventilated Oil Cooler, which provides air circulation to reduce the temperature of the motor's lifeblood. Wrapped in a compact chrome casing, this specific oil cooler comes with a handy little temp gauge to keep you up to speed on your oil's temp, or maybe it will slow you down so you don't blow up the engine.Contact Pro-One (800) 884-4173 www.pro-one.com