Caddy ComfortRiders using RaceTech's Caddies suspension will notice a much plusher, smoother ride on square-edge bumps such as expansion joints and railroad crossings. They are available with chrome or black springs, and different lengths are available to accommodate lowered and custom applications. The spring preload can be quickly adjusted to accommodate those extra-load journeys. Made in the USA, Caddies are constructed of the highest-quality materials. The shock shaft is hard-chromed, the body is made of highly polished chromed steel, and the eyelets and spring collars are polished-billet 6061-T6 aluminum.
For more information, contact RaceTech at (951) 279-6655, or visit www.race-tech.com.
Eye-OpenersThese 41mm billet lower fork legs will stop folks in their tracks. Manufactured by and available exclusively from Pro-One and its dealers, the beautifully designed and precision-machined lower legs are as rugged, durable, and reliable as they are good-looking. Offered in four unique styles with a deep-luster show-chrome finish, Pro-One legs are offered for single- or dual-disc applications.
For more information, contact Pro-One at (800) 884-4173, or visit www.pro-one.com.
Air-SimplifiedImagine a self-contained air suspension that grants both truly clean results and an easy install. The passages are ported internally, and the compressor is integrated with the cylinder housing-no hoses to run, no fittings to fail, and no worries about where to hide the compressor. It comes in hard-anodized black or chrome.
For more information, contact Custom Cycle Control Systems at (702) 438-2129, or visit www.customcyclecontrols.com.
Spring AwayCyril Huze's Springer frontend is offered in any length from 2 inches under to 20 over, in narrow, mid-, or wide-glide styles. Rounded trees and corners give it a smooth, sleek appearance, and it uses Delrin isolated springs and needle-bearing rockers. It is available raw or in chrome.
For more information, contact Cyril Huze at (561) 392-5557, or visit www.cyrilhuze.com.
Old-Style SpringerPaughco is now offering what may be the ultimate chopper Springer. This latest addition is fitted with the company's bulletproof OEM-style tapered rear legs. Stronger and more closely resembling original Springers, the new Paughco frontends are available in a mind-boggling collection of styles and sizes. Tapered-leg chopper models can be ordered in traditional "wide" styles fitted with or without the factory-style shock. All models are offered in lengths ranging from stock up to 21 inches over in increments of 3 inches and are finished in Paughco's in-house chrome.
For more information, contact Paughco at (775) 246-5738, or visit www.paughco.com.
Riding on AirFor smooth, predictable ride quality at any ride height, turn to Air Systems Engineering's AirFX suspension systems. The system uses air pressure from an onboard compressor to create lift from a twin-piston air-cylinder package. Air is also supplied on the opposite side of the triple-sealed pistons, with stainless-steel piston rods providing complete control. The FXA-1002 (shown here) is a lightweight, one-piece, rebuildable, billet-aluminum cylinder that's been given a NiTuff hard-coat anodized finish for long-lasting durability. Other features include a self-lubricating composite rod and mounting-point bushings and remote micro-control buttons supplied with 7 feet of cable. The Air Systems Engineering FXA-1002 is prewired, factory-tested, and comes in a black-anodized or polished finish.
For more information, contact Air Systems at (800) 210-1454, or visit www.airsystemsengineering.com.
Tall Ain't AllIf you've got an '04-or-later XL model and you want to drop it a bit, check out Harley-Davidson's low front-suspension kit. It'll lower the front suspension by approximately 1 inch while preserving ride quality. The shorter fork springs are progressively wound to allow a compliant, controlled ride, and the kit includes two fork springs and damper tubes.
For more information, contact Harley-Davidson at (800) 443-2153, or visit www.harley-davidson.com.
Takes a Lickin'...Licks Cycles just keeps 'em coming: The company's new short shocks will have you rolling along on your dropped scoot in no time. These shocks were developed specifically to maintain ride comfort while lowering the rear stance. The 10-inch short shock is designed for use on '88-and-later Sportster, FXR, FLT, V-Rod, and Bagger models. Licks' short shocks offer direct bolt-on installation for specified machines and feature a durable, show-quality chrome finish.
For more information, contact Licks Cycles at (888) 522-8191, or visit www.lickscycles.com.
Among the EliteAccutronix has added the "Elite Smooth" raked triple-trees to its complete line of raked triple-trees and Elite products. Machined from 6061 billet aluminum and made in the USA, these trees' pinch bolts are concealed on the backside for a smooth appearance. They are available in 41mm wide glide with a 5- or 7-degree rake and 39mm wide- or midglide with a 3-degree rake. Show-polished, chrome, and black-anodized finishes are available.
For more information, contact Accutronix at (602) 993-2675, or visit www.accutronix.com.